EV443/30-32 Corner Cleaner Machine for Vinyl/PVC Profiles
EV443/30-32 Corner Cleaning Machine: With 2,5 mm knives (2-off) Profile
support arm (1-off) Air service unit
Features and Benefits:
Automatically grooves both top and bottom profile faces
and mills outside edge in one operating cycle.
Type EV443/32 also drills gasket
Once set the automatic profile identification facility selects the
correct program cycle for each profile.
Total flexibility with full operation or
isolation of individual functions.
Variable milling cutter dwell time for
Single side grooving selection for wood grain, foil or
acrylic covered profiles.
Small footprint – measures only 860 mm x 980 mm.
Typically accommodates frames down to 25 cm².
Takes profiles up to 125 mm wide.
Multi-position spindle takes up to 3 milling cutters. Independent cutter shaft
mounting with flexible drive eliminates motor strain.
No cutter matching.
Computer controlled. One touch locates frame and starts cutting cycle.
Milling Cutter min. dia. 80 mm
Milling Cutter max. dia. 200 mm
Cutter bore 32
mm Knife 2,5 or 3,5 mm
Mains voltage 220/380, 3~, 50 Hz,
6/3, 5A Power output
1,5 KW Milling spindle 2800 rpm
Compressed air connection 7 bar/100 psi Air consumption 60 ltr per cycle
Dimensions (Length, width, height) 980 x 860 x 1545 mm
Weight 420 Kg
2,5 mm knife
3,5 mm knife
Special cutter set (to suit
''For more information, a leaflet for this machine and access machine video content, please submit your details on the Contact Form , thank you'