GLS181 CNC Bead Saw
For PVC, Aluminium and Wood Profiles
GLS181 CNC Bead Saw: By using the C.N.C controller the cutting of any angle
can be programmed to cut between 60° left and 60° right in increments of 0.1°.
The Bead Saw has 10 CNC programs (more on request). All of which can be used for
sequential cutting, ie: Bottom, Top, Left and Right beads with any angle within
range in any position. Selection of programme or angle cutting is simply entered
by the operator using the digital control pad. Used in conjunction with the G180
220 Electronic Length Stop this is the ultimate beading station. You can be
assured of improving Quality, Output & Reduced Wastage.
Features and Benefits:
Angle positioning by CNC servo motor.
positioning to 0.1 degree increments.
Variable angles from 60º left to 60º right
and all intermediate angles.
Automatic cutting cycle cuts one bead and prepares
Cutting cycle between 4 and 6 seconds depending on material being cut.
Digital keypad (HMI) with function keys and display.
Can be programmed to cut
angles or sequence cutting, essential for overscribe style beading.
can be adjusted from keypad.
Can be used in conjunction with conventional caliper bars or electronic length stop systems.
Quick release tooling for quick change over.
Co-extruded bead can be cut more
accurately than with other conventional machines.
Blade rotation speed
controlled by transistor invertor to increase speed and improve finish.
guarded to meet HSE and CE Regulations.
Voltage 1~, neutral 240V a.c.
Current 13 A
Compressed Air 6
Dimensions (length, width, height) 1000 x 700 x 1200 mm
''For more information, a leaflet for this machine and access machine video content, please submit your details on the Contact Form , thank you'