3HDV/140 Automatic Triple-Head Welder for Corners, Transoms and
All combination heads designed to produce corner, transom and cruciform
joints in window and door profiles. Adapts quickly and easily without the need
of tools. Rear fences line up automatically due to chassis linked permanent stop
to avoid gathering the heads together for re-alignment and eliminating the need
of a “straight edge” setting device. Utilises support blocks with magnets and
special shouldered setting screws to allow quick removal and refitting. No time
consuming hand wheel adjustments. All movements are made with smooth linear
bearings and hardened steel shafts. Automatic head movement locates the profile
providing consistency, speed and ease of loading. Avoiding possible irregular
contact of profile to setting plate of a hand positioned head. “Spring-free”
heater plate float removes bias melt to one side. A small miniature cylinder
centralises the heater plate when necessary. Small footprint only 4.0 m long.
Ideal for small sashes and transom drops down to 325 mm. Fast operating cycle
due to solid wide setting plate eliminating the initial table movements
completely saving time. Designed to be easy to use and simple to maintain.
Safety clamp, two hand control and full compliance with CE regulations.
versions available include Single, Two and Four Head machines.
Mains voltage 400 V, 3~, 50 Hz
Total Amps 9 A Power output per head 2
Compressed air connection 7 bar Air consumption per head 40 ltr per welding
Weld bead limiters 2,0 mm Burn-off 6,0 mm Temperature of heaterplate
Dimensions (Length, width, height) 4000x900x2100 mm
Weight 850 kg
Order No. Type 3HDV/140 Type 3HDV/200 Type 4HDV/140 Type 4HDV/200
Set of support arms
Teflon cover for heaterplate
Air service unit
Variable angle fence
Weld bead limiters 0,2
Burn-Off 5,0 mm
Teflon Cover for heaterplate
Outer contour limiters (to suit
''For more information, a leaflet for this machine and access machine video content, please submit your details on the Contact Form , thank you'