2HD1V/140 Automatic Two Head Welder for Corners, Transoms and
All combination heads designed to produce corner, transom and cruciform
joints in window and door profiles. Adapts quickly and easily without the need
of tools. Rear fences line up automatically due to chassis linked permanent stop
avoid gathering the heads together for re-alignment and eliminating the need of
a “straight edge” setting device. Utilises support blocks with magnets and
special shouldered setting screws to allow quick removal and refitting. No time
consuming hand wheel adjustments. All movements are made with smooth linear
bearings and hardened steel shafts. Automatic head movement locates the profile
providing consistency, speed and ease of loading. Avoiding possible irregular
contact of profile to setting plate of a hand positioned head. “Spring-free”
heaterplate float removes bias melt to one side. A small miniature cylinder
centralises the heaterplate when necessary. Small footprint only 3.0 m long.
Ideal for small sashes and transom drops down to 325 mm. Fast operating cycle
due to solid wide setting plate eliminating the initial table movements
completely saving time. Designed to be easy to use and simple to maintain.
Safety clamp, two hand control and full compliance with CE regulations.
versions available including Single, Three and Four Head machines.
Type 2HD1V, 2HDV
Mains voltage 400 V, 3~, 50 Hz Mains fuse 3x16 A
Power output per head
Compressed air connection 7 bar Air consumption per head 40 ltr per welding
Weld bead limiters 2,0 mm 6,0 mm Burn-off
Temperature of heaterplate 200º-300ºC
Dimensions (Length, width, height) 3000x900x2100 mm
Weight 600 kg
Order No. Type 2HD1V/140 Type 2HD1V/200 Type 2HDV/140 Type 2HDV/200
Set of support arms
Teflon cover for heaterplate
Air service unit
Variable angle fence
Weld bead limiters 0,2
Burn-off 5,0 mm
Teflon Cover for heaterplate
Outer contour limiters (to suit
''For more information, a leaflet for this machine and access machine video content, please submit your details on the Contact Form , thank you'